Working on the Boat

Before we can cast off for a long trip we need to finish a few maintenance items – we’ve learned that it’s much easier to perform preventative maintenance than to do repairs in some remote place.  Some projects had to wait for warmer weather such as working on the davit (a small crane that lifts our 600 lb dinghy up to the boat deck).

20140418 6353 davit apart  RESIZEWe used our ladder to help hold the heavy arm up in the air so Jim could disconnect the hydraulic lines – it’s always good when we can manage things by ourselves.

20140419 6361 splicing amsteel  RESIZEWe had to replace some spacers between the sheaves as well as the “cable”, which is actually a synthetic rope (called Amsteel) that’s as strong as a steel cable.  The rope is a bit pricey ($2/foot) and it requires an eye to be spliced at each end, but I’m a pretty good splicer.  If we ordered the prepared rope from the davit company it would have cost $450!20140419 6356 davit back together  RESIZEThe next project was to adjust the valves on the main engines – a job that should be done every 1000 hours or so.  We put a lot of hours on our engines and it pays to take good care of them.  It goes pretty quickly, though there are 12 valves on each engine to check.  20140420 6368 stbd valves  RESIZEAnd while we were doing engine maintenance, Jim replaced the impellers that draw seawater through the heat exchangers to cool the engines.  The old ones were in good shape, but they were getting too old…

20140420 6370  impeller RESIZEIn the meantime I’ve been giving the boat exterior a thorough washing and a bit of Awlcare.  Cloudy/rainy days are the best for washing a black boat since the sun heats the hull too much and the soapy water can get baked on if I’m not quick enough with the rinse.  Sometimes people ask us if we want a bigger boat and we always say no.  A bigger boat is more boat to wash and clean… things are bigger than two people can handle easily… and you pay for dockage and haul-outs by the foot.  This is plenty of boat for us to take care of!

On the other hand, if you have to wash your mega-yacht, you need to be comfortable with climbing gear and heights!

OLY20140416_002 washing megayacht closeup RESIZE

 

One thought on “Working on the Boat

Leave a Reply to Ed and Linda Harms Cancel reply

Your email address will not be published. Required fields are marked *